VTC1400

Category:

Vertical Lathe

The vertical guide rail of the machine tool adopts a cross slider structure, and castings such as columns, bases, and sliding seats are all made of gray cast iron. The column and slide guide rail are both high-frequency quenched, and the moving surface of the guide rail is treated with plastic to ensure.

Tel：

+86-13371109792

Download：

Inquiry

Products

Characteristics of Vertical Lathe

•The vertical guide rail of the machine tool adopts a cross slider structure, and castings such as columns, bases, and sliding seats are all made of gray cast iron. The column and slide guide rail are both high-frequency quenched, and the moving surface of the guide rail is treated with plastic to ensure.
•The stability and accuracy retention of machine tools for long-term use. The machine tool is fully enclosed and protected, with a beautiful and elegant appearance.
•The spindle transmission of the machine tool adopts a spindle servo motor, imported spindle bearings, low speed and high torque, suitable for strong cutting; Suitable for semi precision machining and precision machining of parts.
•The X/Z axis feed is automatically controlled by a servo motor. The Z-axis adopts a counterweight, with a reliable structure and low failure rate.
•The X/Z axis of the machine tool adopts precision ball screw and is equipped with imported special bearings for the screw, meeting the requirements of high-precision and high rigidity cutting.
•The machine tool spindle adopts a thin oil lubrication method, with external circulation of lubricating oil. The spindle bearing has good fan heat effect; Or the structural form of the spindle unit. •The machine tool guide rail is lubricated by an electric oil pump.
•The machine tool is equipped with hydraulic chucks, with high positioning accuracy and large clamping force.

Specifications

Specifications	Unit	VTC1250	VTC1400	VTC1600
Maximum rotation diameter of workpiece	mm	1250	1400	1600
Maximum machining diameter	mm	1050	1250	1400
Spindle speed	rpm	20-500	20-400	20-350
Vertical movement distance of tool carrier	mm	800	800	800
Horizontal moving distance of tool rest	mm	-50-650	-50-750	-50-850
X-axis fast moving speed	m/min	15	15	15
Z-axis fast moving speed	m/min	12	12	12
Turret form	/	Horizontal 4 stations	Horizontal 4 stations	Horizontal 4-station4
Cutter bar section	mm	Φ32/50	Φ32/50	Φ32/50
Main motor power	kw	22/30	22/30	30/37
Hydraulic chuck diameter	mm	Manual four jaw chuck 1000	Manual four jaw chuck 1250	Manual four jaw chuck 1400
X/Z Power and torque of feed motor	kw/nm	3.5/22	3.5/22 4.7/30	4.7/30
X/Z Linear guide rail	mm	65/55	65/55	65/55
X/Z lead screw diameter	mm	Φ50	Φ50	Φ63
The weight of the machine tool is about	T	12.8	13.8	15.5
Outline dimension of machine tool	m	2.7x2.85x3.25	28x2.95x3.25	3.0x3.0x3.25