VMC1275

Category:

Vertical Machining Center

High quality resin sand cast iron Taiwan main axis Taiwan ball screw and lock nut Taiwan booster cylinder NSK bearing in Japan German R + W coupling Automatic lubrication system Selection of chip conveyor

Tel：

+86-13371109792

Download：

Inquiry

Products

Specifications	Unit	VMC1580	VMC1370	VMC1270	VMC1160
X-Axis Travel	Mm	1500	1300	1200	1100/1000
Y-Axis Travel	Mm	800	700	700	600
Z-Axis Travel	Mm	700	700	600	600
Table Size（L*Degrees）	Mm	1700×800	1360×700	1300×700	1200×600
Maximum Table Load	Kg	1500	1400	1300	1000/800
T-Slot(Slot NumberWidthPitch)	Mm	5×22×135	5×22×140	5×22×140	5×18×100
Spindle Taper	-	BT50	BT50	BT40/BT50	BT40
Spindle Power	Kw	15-18.5	15-18.5	11	11-15
Maximum Spindie Speed	Rpm	6000/8000	6000/8000	6000/8000	8000/10000
Rapid Traverse(X/Y/Z)	M/Min	2012/12/12	24/24/16	36/36/36	36/36/24
Diameter Of XYZ Screw Rod	Mm/Min	6310/5010	6310/5010	6310/5010	4012/4016
Feed Motor	NM	25/32/25	25/25/25	25/25/25	20/20/20
Spindle Nose To Table	Mm	130-870	160-860	160-760	140-740/130-680
Spindle Center To Columnsurface Distance Rail	Mm	810	780	750	650
X-Axis Rail	Mm	55pin Roller	45pin Roller	45pin Roller	45pin Roller
Y Axis Rail	Mm	45*4pin Roller	45*4pin Roller	55pin Roller	45pin Roller
Z-Axis Orbit	Mm	55Roller/Hard Rail	55pin Roller	45pin Roller	45Roller/Hard Rail
Positioning Accuracy	Mm	±0.0075	±0.0075	±0.0075	±0.0075
Repeat Accuracy	Mm	±0.005	±0.005	±0.005	±0.005
Machine Weight.(About)	T	13	10	8	6.9
Dimensions	M	4.3×3.2×3.1	3.87×3.17×2.92	3.75×2.28×2.4	3.4×2.5×3.0